ROOMBA·FAULT ERR 68 WARN
Roomba Error 68 — Camera error
Severity: Warning — navigation is blind until the camera comes back — usually one reboot away j
DIRECT ANSWER
Error 68 means the camera stopped sending data during cleaning, so the robot can't navigate. Park it on the dock and reboot — that clears it in most cases. A camera fault that returns needs support.
#meaning · #causes · #fix — link straight to any section
COMMON CAUSES · RANKED
1
Camera subsystem hung MOST COMMON
The camera's software stopped responding mid-job. A reboot restarts it cleanly.
2
Obstructed camera window
Dust, a sticker or a fingerprint smear over the lens can starve navigation of images.
3
Camera hardware failure RARE
Repeated error 68 after reboots means the module itself is faulty.
HOW TO FIX IT
No battery or electrical work involved in this fix.
Dock and reboot
Place the robot on the Home Base and perform a reboot — hold CLEAN until the light ring responds.
Clean the camera window
Wipe the lens cover with a dry microfiber cloth. No solvents.
Contact support if it returns
A recurring camera fault is a hardware problem, not something maintenance fixes.
Did this fix your robot? No reports yet for this fix — be the first.
RELATED FIRMWARE
j series (j7, j9, Combo j7+, Combo j9+)
22.7.222.5223.2423.53.424.29.0124.29.6
Firmware timelines are rebuilt monthly from release notes. Versions marked as sample data are community-reported and not yet verified. Full firmware timeline →
Corrections
Spotted an error? Report a correction — fixes ship within 48h and are logged on this page.